The largest producer of concrete additives in Iran

The largest producer of concrete additives in Iran

Concrete is a widelyives  used material. This material consists of the main components that are divided into three categories: adhesive, water and filler, without the presence of these components, concrete will not be formed. But besides the main components, there are various materials that are used to improve some properties of concrete and also to add different characteristics to concrete.

We at Iran Beton and Betono, as The largest producer of concrete lubricant in Iran , decided to introduce some of the most important supplements or concrete additives in this section.

It goes without saying that the use of additives has its own standards, which are detailed in the national regulations. Continue to be with the largest producer of concrete additives in Iran.

Definition of concrete admixture

Additives can be both chemical and inorganic. The amount of their consumption is determined as a percentage of the weight of cement, and according to the regulations, this amount should not exceed 5% of the weight of cement.

Although additives are used to improve the properties of concrete, you should note that improper use and more than allowed can have bad consequences. As mentioned, there are different types of additives that are used in both fresh concrete and hardened concrete. To learn more about these materials, you can contact the numbers available on the website of Iran Beton and Betono, as the largest manufacturer of concrete additives. Call in Iran.

Additive use

 In the previous parts of this article, we mentioned that additives are used to improve the properties of concrete, and if we want to mention the factors affecting the use of additives, we can mention the type of aggregates and their grading, dimensions of aggregates, durability Concrete, required performance, required compressive strength for concrete according to project conditions, etc. Stay with Iran Beton and Betono to review all kinds of mineral and chemical additives. The important point is that the quality of additives is one of the most important factors in choosing a product brand, and we, the largest concrete additive producer in Iran, produce all products with first-class materials and equipment and deliver them to you dear ones.

Mineral additives

 These supplements are divided into four categories: rice husk ash, silica fume, fly ash, and iron slag.

Chemical additives

This category of additives is placed in the category of chemical substances and its most important types are categorized as follows:

• Concrete pigments
• Antibacterial, antifungal and antibacterial substances
• Anti-corrosion materials
• Concrete anti-shrinkage materials
• Adhesive materials to strengthen the connection of concrete components
• Types of mortars
• Bubble supplements
• Anti-bubble supplements
• Lubricants
• Water reducing supplements
• Super lubricant supplements
• Concrete retarders
• Concrete accelerators
• Waterproofing materials …

As the largest producer of concrete additives in Iran, we produce the best concrete additives with the best combination and first-class materials and we provide them to you through the Iran Beton and Betono site and in person.

Important points in the use of additives

The use of any additive must be done under the supervision of the relevant and qualified expert and with the approval of the monitoring body.

The percentage of use of additives and its type must be determined in advance by the laboratory and approved by the relevant experts.

If several different additives are to be used at the same time, you should pay attention to their compatibility with each other.

It should be noted that the performance of additives remains constant over time.

You should note that calcium chloride and chlorine cause decay in reinforcements, so the use of additives containing these substances for reinforced concrete is prohibited

To use additives, you must first mix them with the water that is supposed to be used in the concrete composition and then add to the rest of the components. Another method is to gradually add it to the ingredients being mixed. Iran’s concrete and concrete experts are ready to provide additional advice and advice to you, dear friends.

In the largest producer of concrete additives in Iran, the method of using supplements is detailed on their packaging, and it is recommended that you pay attention to them.

Purchase of concrete additives

Considering the important effects that supplements have on the quality, durability and life of concrete, we suggest you buy quality and reliable products. For this purpose, to buy additives from the largest producer of concrete additives in Iran, you can contact the numbers of Iran Beton and Betono.

It should be noted that our professional experts are ready to provide advice on choosing and purchasing the desired product

In order to maintain the additives, you must use them in the right conditions and the conditions listed on the packaging by the largest producer of concrete additives in Iran.

Some additives can be used for a longer period of time and some materials lose their properties more quickly, keep this in mind.

Mixing ratios should be determined by the laboratory.

Keep the materials in their original packaging.

Products should be kept away from direct sunlight and should not be exposed to freezing.

As we discussed together in this article, we realized the importance of concrete additives and we knew that you should use high-quality and reliable products. All products produced by the largest concrete additive manufacturer in Iran are produced with high-quality materials and in ideal laboratory conditions. turn around For more information, you can contact the numbers available in Iran Beton and Betono.

09001887000