The largest producer of polycarboxylate ether in Iran

The largest producer of polycarboxylate ether in Iran

Polycarboxylate ether with the Latin name Polycarboxylate Ether refers to substances that are classified as chemicals and contain carboxylate groups. Now, if we want to mention how this substance is formed, we must say that epoxies and alcohols react together and polycarboxylate ether is obtained.

As the largest producer of polycarboxylate ether in Iran, we at Iran Beton and Betono have decided to introduce this product in this section, and we invite you, dear readers, to stay with us until the end of the article.

 Polycarboxylate ether

This material has a wide range of molecular structures that determine the performance of polycarboxylate ether. Of course, it should be noted that various factors such as the chemical characteristics of acrylic, maleic, methacrylic and other materials, the chemical characteristics of polypropylene, oxide, etc., the way of distribution of side strands, etc. are involved in the performance of this material. are

In order for polycarboxylate ether to work in the best way, it must be produced under the supervision of experienced experts, and we at Iran Concrete and Betono do this as the largest producer of polycarboxylate ether in Iran. The good news is that whenever you need help, you can call the numbers listed in Iran Beton and Betono.

In general, it can be said that it causes the cement particles to disperse well in the entire concrete composition, how does it do this? By creating a gap between cement particles! This will cause all the cement particles to be dispersed well everywhere in the concrete composition and to have a more uniform composition and prevent the cement particles from clumping.

As long as the cement particles are well dispersed in the entire composition of concrete or other mortars, they all participate in the reaction with water, and in this way cement is not wasted and its consumption is saved.

 

 Production of polycarboxylate

The production of this material is completely specialized and must be done in laboratory environments with appropriate equipment and under the supervision of qualified experts, and we at Iran Beton and Betono, as the largest producer of polycarboxylate ether in Iran, do this

The production steps of polycarboxylate ether are as follows

• Melting the coarse base monomers in the reactor

• Adding solvents such as tetrahydrofuran and… to the first stage

• Adding acrylic acid or other acids to the materials

• Perform various tests including ph and ftri

All these steps are carried out carefully and in a standard way in the largest producer of polycarboxylate ether in Iran.

It goes without saying that ether carboxylate has different types, which we will discuss in the next section.

Investigation of polycarboxylate ether types

In general, this material is produced and supplied in three forms: slump preserver, water reducer and powder by the largest producer of polycarboxylate ether in Iran, Iran Beton and Betono.

Slump saver

As it is clear from the name of this category of carboxylates, it causes proper fluidity in concrete. This happens with the production of aeration in concrete at a low level and at a standard level.

By using this type of carboxylate, the fluidity of concrete can be increased to more than 200 mm, and the important point is that this amount of fluidity will not change for about 30 minutes.

In general, with the explanations presented, it can be said that the slump preserver can be used for concreting in areas with hot weather. Because the heat of the air in these areas causes the water in the concrete to evaporate prematurely and not reach its strength.

Also, in times when there is a long distance between the place of concrete production and concreting, it is possible to maintain the fluidity of concrete by using quality slump preserving materials produced in the largest producer of polycarboxylate ether in Iran.

water reducer

This type of carboxylate can reduce the water required for concrete production by about 45%, that’s why they are used in the production of super lubricants. Among the effects of this material in concrete, we can mention the increase of fluidity of concrete, prevention of flaking of concrete and significant increase of its strength.

powdery

This material is used in most of the additives that are combined with cement materials due to its characteristics. This material is used to produce third generation lubricants and can reduce the water required for mixing concrete by 40%.

Among the effects of powdered carboxylate ether, we can point out the prevention of water loss in concrete and the separation of components, the uniformity of the concrete composition, the creation of proper fluidity, and the control of the initial and final setting time of concrete.

Investigating the applications of polycarboxylate

• Accurate and appropriate impact on the initial setting time of concrete

• Accurate and appropriate impact on the final setting time of concrete

• Concrete slump preserver for a longer period of time

• Increasing the strength and durability of concrete

• Reducing the ratio of water to cement

• It reduces the temperature of concrete in massive concreting.

• It is used to produce ready-mixed concrete.

• It is used in the production of self-leveling concrete.

• It is used to make specialized concrete.

• Prevents the concrete from spilling.

Buy ether carboxylate

To buy carboxylate ether through the largest producer of polycarboxylate ether in Iran take action Our experts in Iran Beton and Betono are ready to provide basic advice to you dear ones. As the largest producer of polycarboxylate ether in Iran, all our products are produced in a completely standard way with first-classm aterials and standard equipment

0901887000